Press "Enter" to skip to content

Pontoon Fenders- Choosing the right kind of boar fenders


Boat fenders are a crucial piece of equipment. These offer complete protection to any water vessel. While your boat is an expensive commodity, fenders are pretty economical. Common sense says to protect your investment at all costs. Fenders help do just that. These can actually help keep your expensive boats secure.

However, it’s necessary that you buy fenders in the right size and number. This would allow you to use these properly. Is always better to have more fenders then less.

Using a boat means that you have to be wary of all sort of mooring conditions. You may need tore the boot during a hurricane or during extremely rainy weather. Fenders help keep your boat protected during these instances.

Different kind of pontoon fenders

Different fenders are available for a variety of pontoons. If the vessel is smaller and lighter sausage shaped fenders are a good option. While round fenders or cylindrical fenders are better for larger and heavier vessels.

Cylindrical fenders can be hung both vertically and horizontally. There a single knot which passes through the middle in figure eight knots. When the boat is to be moored against the docks, it’s better to hand the fender in a vertical position.

On the other hand if you want to protect your boat from protruding structures it’s better to hang the fenders horizontally. This can help prevent damage from pilings and can prevent roll offs.

There are fenders which are designed for specific purposes. These include the following kinds:

  • For people whose pontoons have a low freeboard, there are proper fenders which can help prevent the rub rails of the boats from suffering any sort of damage.
  • Transom fenders on the other hand protect the swimming platform of the boat or the stern of a sail boat.
  • Fender cushions can help protect the boat to quite an extent.

Investing in fenders doesn’t require a great deal of cash. Buying the right fender for your boat can help you save a great deal in the long run. You wouldn’t actually have to worry about the pontoon suffering any kind of damage.


Things to keep in mind when choosing pontoon fenders

There are three things to consider when buying pontoon fenders. These include the weight of the boat. The bigger and heavier the boat the more fenders it would require. The length of the boat and the mooring conditions are to be taken into account as well. If you are always at sea and even during weather which others might consider risky you do need fenders to help protect your bot especially if you moor during an emergency condition.

Cylindrical fenders should have a one inch diameter, round fenders should have two inches. So if a boat is less than ten feet in size it would do well with three cylindrical fenders on the other hand a larger boat would require more fenders based on its actual size.

In order to ensure that the fenders do their job right it is necessary to suspend them in the right manner. Either vertically or horizontally is based on the requirement of the boat or pontoon.

Find out more about pontoon fenders by conducting research on the internet and by asking experts.


Comments are closed.